Peugeot Traveller reliability

On affected vehicles there may be insufficient fixing on the 1st and/or 2nd row of seats that could potentially allow seat movement in the event of a collision

Fix: On the affected vehicles seat fixings will be reworked

Recalled models: TRAVELLER · 22 vehicles

On affected vehicles the AC compressor stator wiring could develop a fault leading to current loss inside the AC compressor that could result in a vehicle powertrain shutdown when driving.�

Fix: Reprogram the Powertrain Diagnosis ECU with updated software.

Recalled models: TRAVELLER · 29,537 vehicles

Affected vehicles may have a steering tie rod/track rod end nut that has not been tightened to the correct torque.

Fix: Replace the steering tie rod/track rod end nut and tighten to the correct torque.

Recalled models: TRAVELLER · 4 vehicles

Some vehicles may have been equipped with an incorrectly positioned fuel pipe.�

Fix: Check fuel pipe positioning correct if necessary and fit protective sleeve.�

Recalled models: TRAVELLER · 2,231 vehicles

On the affected vehicles equipped with a manual handbrake the efficiency of the handbrake and service brake may be compromised.�

Fix: Check the rear brake caliper references and replace as necessary.�

Recalled models: TRAVELLER · 57 vehicles

The High Voltage Harness might not be to the correct specification.

Fix: Check the harness conformity and replace it if necessary

Recalled models: TRAVELLER · 16 vehicles

Affected vehicles may have been equipped with headrests on the front modular seat which do not conform to the design specification.

Fix: Check the conformity of the front headrests (presence of the catch); in cases of non-conformity the front headrests will be replaced.

Recalled models: TRAVELLER · 708 vehicles

The rear window electrical harness could become displaced from its original position and present a potential thermal issue.

Fix: Check the routing of harness and replace the electrical harness if necessary. Add a fastening clip to ensure that the electrical harness will be maintained in its normal position.

Recalled models: TRAVELLER · 51 vehicles

The rear spring centraliser might be welded incorrectly.

Fix: Add 3 weld spots to the rear spring centralisers

Recalled models: TRAVELLER · 2 vehicles

A single wheel bolt on both right-hand wheels may not be tightened to the correct tightening torque.

Fix: Check and if necessary replace wheel bolts and any other associated parts if consequential damage has occurred.

Recalled models: TRAVELLER · 4 vehicles

A single wheel bolt on both left-hand wheels may not be tightened to the correct tightening torque.

Fix: Check and if necessary replace wheel bolts and any other associated parts if consequential damage has occurred.

Recalled models: TRAVELLER · 11 vehicles

A rear seat longitudinal adjustment lever may not lock properly.

Fix: Check affected seat frames and replacing them if necessary.

Recalled models: TRAVELLER · 11 vehicles

Affected Vehicles have been fitted with an exhaust system which is not correct to specification

Fix: Install correct exhaust system catalytic convertor.

Recalled models: TRAVELLER · 1 vehicles

The tightening of the seat belt fixings and of certain earth cables may not conform to specification

Fix: Tightening of the seat belt fixings and of certain earth cables.

Recalled models: TRAVELLER · 127 vehicles

The fuel pipes under the body may have been damaged over time due to a relative movement between these pipes and their surroundings.

Fix: Check the condition of the fuel pipes and replacing them if necessary. New protection will be fitted on all vehicles to prevent this damage in the future.

Recalled models: TRAVELLER · 22,882 vehicles

The rear brake hoses may have been damaged over time due to inappropriate movement between these hoses and a clip.

Fix: Check the condition of the rear left-hand and right-hand brake hoses and replacing them if necessary. A new retaining clip is fitted on all vehicles to prevent this relative movement.

Recalled models: TRAVELLER · 21,217 vehicles

The tightening and positioning of the seat belt lower bolts may be incorrect.

Fix: This campaign consists of checking and if necessary correcting both the position of the bolt and the tightening torque of all of the lower fixings of the seat belts.

Recalled models: TRAVELLER · 4,485 vehicles

A non-conformity of the rear brake callipers could reduce the efficiency of the parking brake.

Fix: Check and if necessary replace the callipers

Recalled models: TRAVELLER · 134 vehicles

The tightening of some rear suspension fixings may not be correct to specification.

Fix: Correcting some tightening torques and replacing some nuts and bolts.

Recalled models: TRAVELLER · 1 vehicles

Possible non-conformity of certain seals in the front wheel arches could lead to water ingress into the passenger compartment.

Fix: Resealing these areas checking for the presence of water in the passenger compartment and replacing certain components in the interior if required.

Recalled models: TRAVELLER · 916 vehicles

There is a possibility that the rear brake hose may become damaged due to relative movement between the hose and the holding clip.

Fix: Check the condition of the left and right rear brake hoses and replace them if necessary.

Recalled models: TRAVELLER · 4 vehicles

Certain seals in the front wheel arches may not be correct to specification and may cause water ingress into the passenger compartment

Fix: Resealing these areas checking for the presence of water in the passenger compartment and replacing certain components in the interior if required

Recalled models: TRAVELLER · 3 vehicles

There is a risk of inadvertent release to the front outer passenger seat belt.

Fix: Modifying the central seat buckle with foam and heat-shrinkable protective tubing

Recalled models: TRAVELLER · 16,828 vehicles

Possible slackening of the front wishbone ball joint.

Fix: Increasing the tightening torque of the ball joint and adding thread lock if the ball joint threads are found to be rusty or loose the ball joint will be replaced

Recalled models: TRAVELLER · 10,936 vehicles

The rear suspension wishbone mountings bolts may not be correct to specification.

Fix: Replacement of the rear suspension wishbone bolts.

Recalled models: TRAVELLER · 326 vehicles

Excessive loading of the front suspension could result in the loosening of the front wishbone lower ball joints.

Fix: Increasing the tightening torque of the ball joint and adding thread lock to the ball joint threads if the ball joint threads are found to be rusty the ball joint will be replaced.

Recalled models: TRAVELLER · 2,942 vehicles

The air conditioning compressor pulley could break and damage other components.

Fix: Replace the air conditioning compressor pulley and if necessary the protective cover.

Recalled models: TRAVELLER · 2,643 vehicles

The steering rack assembly may not be correct to specification.

Fix: Replace the steering rack assembly and the fixings.

Recalled models: TRAVELLER · 14 vehicles

The fixing bolt of the front Suspension wishbone may not be correct to specification.

Fix: Replace the fixing bolts and nuts of the front suspension wishbones.

Recalled models: TRAVELLER · 21 vehicles

The cooling system strategy and the maximum temperature alert could cause the engine to overheat this may cause an oil leak from the sump drain cap. Due to the incorrect operation of the warning system there is no driver alert.

Fix: The remedy involves downloading new engine management software.

Recalled models: TRAVELLER · 841 vehicles

On the affected vehicles the tightening of a sealing plug on the engine oil gallery may not be correct to specification.This could lead over time to an oil leak which in rare cases could result in oil leaking on to the road.

Fix: The remedy consists of tightening the engine oil gallery sealing plug to the correct torque

Recalled models: TRAVELLER · 47 vehicles

An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.

Fix: On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.

Recalled models: TRAVELLER · 314 vehicles

The positioning of the starter supply terminal may be incorrect. This may allow it to foul other components and cause a short circuit.

Fix: On affected vehicles check the positioning of the terminal and correct it if necessary.

Recalled models: TRAVELLER · 16 vehicles

Possible non-compliance of an internal component of the starter control relay could cause damage by overheating. This could cause unintended operation of the starter motor and in extreme instances; there is a risk of fire.

Fix: On affected vehicles check and if necessary replace the relay

Recalled models: TRAVELLER · 84 vehicles

The tightness of one of the air conditioning compressor support mountings may not be correct to specification. This will result in an abnormal noise and possibility of the compressor becoming insecure

Fix: On affected vehicles check the tightness of the support; where necessary the support will be replaced.

Recalled models: TRAVELLER · 1,326 vehicles

A possible nonconformity of an internal component of the starter motor relay could affect the control of the starter motor. This could adversely affect the starting operation and damage the starter motor due to overheating and in extreme cases there is a risk of fire.

Fix: On affected vehicles check and where necessary replace the starter motor relay.

Recalled models: TRAVELLER · 6,768 vehicles

A component in the gearbox actuator may not be to the correct specification which may affect gear selection.

Fix: On affected vehicles replace the gearbox actuator

Recalled models: TRAVELLER · 13 vehicles

It has been identified that the wheel bolts may not have been tightened to the correct specification. The driver may experience a vibration through the steering wheel. However it not rectified there is a risk that the wheels may become damaged over time or the wheel could in extreme cases could detach from the vehicle whilst driving. This could cause loss of control of the vehicle.

Fix: Recall all affected vehicles to check the tightness of the road wheel bolts and rectify as necessary. In certain cases the replacement of the bolt(s) and wheel(s) may be necessary.

Recalled models: TRAVELLER · 42 vehicles

It has been identified that the fuel filler neck assembly may not have been correctly installed at production. This can therefore result in a fuel leak from around the fuel filler area if the fuel tank is filled to maxumum or can fuel leak if the vehicle rolls over..

Fix: Recall all affected vehicles to check fuel filler neck and rework/rectify if required.

Recalled models: TRAVELLER · 58 vehicles

Incorrect assembly of the steering rack which could cause the loss of the mechanical link between the steering pinion valve and the steering rack during parking manoeuvres at full lock.

Fix: Check affected vehicles and where necessary replace the steering rack.

Recalled models: TRAVELLER · 2 vehicles

The tightening torque of one of the nuts of the connection between the brake servo unit and the brake pedal may be not correct to specification. This may allow air to enter the servo

Fix: Check servo security and where necessary replace the brake servo unit

Recalled models: TRAVELLER · 5 vehicles

It has been identified that due to a possible non-conformity of certain seals on the vehicle�s body there is the possibility that water can enter the passenger compartment of the vehicle. The occupants should experience either wet carpets and or a possible damp smell. However the ingress of water into the cabin could affect the electrical operation of the airbag module which could lead to an unexpected deployment of the airbag.

Fix: Recall all affected vehicles to add additional sealant to the body interfaces and if required to replace any interior components damaged by the water ingress.

Recalled models: TRAVELLER · 100 vehicles

The bolts retaining the front shock absorber could come loose. This may adversely affect the steering control of the vehicle.

Fix: On affected vehicles replace the front shock absorber retaining bolts.

Recalled models: TRAVELLER · 2 vehicles

On the affected vehicles a possible nonconformity of certain seals on the vehicle�s body could lead to water ingress in the passenger compartment. This may affect the operation of the passenger air bag. Unintended deployment is possible.

Fix: On affected vehicles add extra sealant and replace wet or water damaged components.

Recalled models: TRAVELLER · 1,312 vehicles

It has been identified that some ground connections of the cabin wiring harness and the fixings of the airbag control unit may not be to specification. This issue or non-compliance could cause erratic malfunctions of certain electrical equipment even in very rare cases causing the engine to cut-off or airbags malfunction.

Fix: Recall all affected vehicles to check tightness of the ground connections and airbag control unit fixings. If required these will need rectification.

Recalled models: TRAVELLER · 1 vehicles