Peugeot 206 reliability
The Peugeot 206 fails its MOT more often than most cars over 10 years old: 47.4% of 58,668 tests failed in 2023, against 39.7% on average.
15 DVSA recalls for the Peugeot 206
Most cover a batch of cars built in a set period, and dealers fix them free. Sweep’s check shows the recalls for a car’s age and whether the DVSA has one outstanding.
Engine may fail
It is possible that the con-rod bearing shells will not conform to manufacturer specification. This could lead to premature deterioration of the shells and in time cause the engine to fail.
Fix: To replace the con-rod bearing shells
Recalled models: 206 · 1,851 vehicles
Fuel pipe may leak
It has been identified that on subject vehicles a fuel pipe may not be correctly sealed. Should this be the case seepage of fuel may occur.
Fix: Recalled vehicles will have the subject fuel pipe checked and replaced as necessary.
Recalled models: 206 · 61 vehicles
Windscreen wipers may fail
It has been identified that on subject vehicles the windscreen wiper mechanism has not been manufactured to specification. As a result in time the windscreen wipers could fail.
Fix: Recalled vehicles will have the windscreen wiper mechanism replaced.
Recalled models: 206 · 17,551 vehicles
Front right hand seatbelt fixing bolt may fail
It has been identified on a small number of vehicles that the spacer for the front right-hand seat belt fixing bolt may have been incorrectly fitted. It is therefore possible that in time this could result in the fixing for the assembly becoming insecure.
Fix: Recalled vehicles will have the fitting of the spacer checked for compliance with the specification. If found to be necessary the trim will be repositioned and the assembly re-tightened to the correct torque.
Recalled models: 206 · 4 vehicles
Possible seepage on the diesel fuel return pipe
There is a risk of a manufacturing non conformity on the fuel injection diesel return pipe. This may lead to the possibility of fuel seepage.
Fix: As a preventive measure likely to be affected vehicles will have the pipe replaced additionally the pipe will be fitted with protective sleeves.
Recalled models: 206 · 2,573 vehicles
Possibility that the starter motor wiring loom is incorrectly positioned
The possibility exists that the starter motor wiring loom has been positioned incorrectly. In consequence there is a risk that this could cause a short circuit.
Fix: Recall likely to be affected vehicles and correctly fit the wiring loom.
Recalled models: 206 · 1,128 vehicles
Possibility of erratic operation of the motorized throttle body
The software may cause erratic operation of the motorized throttle which may result in breakage of the throttle stop. This can result in the engine reverting to limp home mode with a possible reduction in braking assistance.
Fix: Subject vehicles will be recalled and the condition eradicated by carrying out an ECU download.
Recalled models: 206 · 2,735 vehicles
Possibility that the rear spoiler may detach
The spoiler mounting on the rear tailgate may in certain cases have some weak points and cause some noise.This may even lead to the loss of the spoiler
Fix: Recall affected vehicles and replace the 4 spoiler fixing bolts and fit two safety straps
Recalled models: 206 · 5,388 vehicles
Service brake linkage may become disconnected
It is necessary to exchange the two clevis pins on the brake pedal system to avoid any loss of braking. Peugeot have experienced a limited number of incidents where one of the pins has not been locked properly during fitting.
Fix: Recall the potentially affected vehicles and replace the two clevis pins on the brake pedal system.
Recalled models: 206 · 284,339 vehicles
Ignition key may foul steering column cowling
There is a possibility that the steering column cowling may move out of alignment causing the ignition switch to foul on the steering cowling and possibly stick in the start position.
Fix: Recall affected vehicles and check and where necessary replace the steering column clamp. The cowling unit is replaced on all vehicles recalled.
Recalled models: 206 · 12,747 vehicles
Seat belt anchorage concern.
There is a risk that the lower attachment on the front and rear left hand seat belts could be loose.
Fix: Recall the affected vehicles to check and if necessary tighten the seat belt fixings.
Recalled models: 206 · 23 vehicles
Passenger airbag may fail to deploy
Incorrect specification passenger airbag internal module.
Fix: Recall affected vehicles replace airbag.
Recalled models: 206 · 86 vehicles
Front suspension concern
There is a possibility that the front stub axle lower ball joint fixing may have been incorrectly machined which may result in separation of the stub axle from the ball joint/lower suspension arm.
Fix: Recall affected vehicles to check and if required replace the left and right stub axles which will be carried out free of charge.
Recalled models: 206 · 384 vehicles
Unintentional deployment of side air bags
Possibility of unintentional deployment of either side air bags
Fix: Recall affected vehicles and replace both side air bag control units.
Recalled models: 206 · 1,416 vehicles
Fuel may leak from fuel filter
There is a possibility that fuel may seep from fuel filter housing due to external corrosion. A fire risk may exist.
Fix: Recall affected vehicles and replace aluminium fuel filter with a plastic fuel filter.
Recalled models: 206 · 49,235 vehicles
Checking a Peugeot 206 before you buy
Look at the parts above at the viewing, and read the car’s own MOT history: advisories for the same parts suggest the problem is already starting. Sweep’s free check shows every MOT, advisory and mileage reading for a registration.